|
Default Printer Setting
If you are unable to
print, check your
default printer
settings:
Click 'File'
on the menu bar,
then 'Print',
then look at the
"Name."
It should read:
\\studentsps2\PRC02
(for printer on
main level of
the Library) or
\\studentsps2\PRC01
(for printer on
lower level -
basement of the
Library)
If PRC02 or PRC01
are not
listed, do the
following:
1. Click
'start' (lower left
corner of screen).
2. Click
'Run'.
3. Type
\\studentsps2 (use
the backslash above
Enter key).
4. Click 'ok'.
5. Scroll to
find, then double
click the printer
you wish to use:
'PRC02' (main
level of the
Library) or
'PRC01' (lower
level - basement of
the Library)
6. A new
window will appear.
Click 'Printer' in
upper left corner of
new window.
7. Click 'Set
as Default Printer'.
Now check your final
settings before
printing:
8. Click
'File' on the menu
bar, then click
'Print'.
9. Check the
Printer Name. If the
desired printer is
not highlighted,
click:
\\studentsps2\PRC02
(for printer on
main level of
the Library) or
\\studentsps2\PRC01
(for printer on
lower level -
basement of the
Library)
You are now ready to
print. |